How to Prevent Data Loss on Floppy Disk

Floppy disks were invented during the early days of the personal computer and before the development of the Internet to the levels of where it is today. At the time, they were the best way to transfer data from one computer to another, but there have been plenty of better portable storage innovations since the time of the floppy. There were similar means of transferring data created before it, but there had never been such a small and compact way to hold computer files in your hand. Floppy disks are still available today and some people are not quite ready to move on to the technological advancements, even though a disk is very likely to have to go through some kind of floppy recovery at some point during the time it’s being used. These diskettes are well known for having problems relating to data loss and complete disk failure, which leads users to trying various different floppy disk recovery techniques. While some floppy recovery methods can work at home, you usually have to pay for an expert if you really want your data restored. The best way to avoid having to pay a floppy disk recovery professional is to prevent the problems in the first place by taking good care of your disks.

While it is unlikely that you have some magnets laying around near your container of floppy disks, it should be noted that doing so will have horrendous effects of the floppy diskettes. Magnets can alter your disks in a negative way because the data on the disks is stored in magnetic fields. Even brief exposure to a powerful magnet can end up erasing data from a floppy, although it usually takes long-term exposure to cause the need for floppy recovery. If you have exposed your disks to magnets in the past, you may have to contact a floppy disk recovery specialist to see if they can retrieve your lost data. Like most other pieces of computer equipment, you should never let your floppy disks become moist. Moisture and electronics have never mixed well and the floppy is no exception. Water and damp places are a recipe for destruction and will quickly have you on the phone calling a floppy recovery professional. The most obvious way you can take good care of your floppy disks is to never bend or break them. Floppy disks get their name from being able to bend a little bit in each direction, but they will break in half if you go to far when testing their limitations. Handle them delicately whenever you use them because they can snap if you put too much pressure on one side of the disk. Also, remember to be careful when you are writing on your floppy with a pen because if you press down too hard, this can also cause problems for your disk’s ability to read data. Problems involving a physically broken disc are much less likely to be able to be fixed by a floppy recovery specialist.

Leave a Reply